英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
intractile查看　intractile　在百度字典中的解释百度英翻中〔查看〕
intractile查看　intractile　在Google字典中的解释Google英翻中〔查看〕
intractile查看　intractile　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Test Drive: High Performance Engine Failure Modes Flashcards
    Too much clearance for the component causes a hammering effect in the pin tower The reciprocating motion of the piston attempts to pull the rod from the cap Check the insulators around the electrodes on the spark plugs Broken valve springs can cause an extreme amount of valve noise and may cause erratic exhaust gas temperature
  • Causes and possible consequences of valve failures in the engine
    Possible causes include an incorrectly set valve clearance − or the valve seat insert or valve guide were not remachined centrically An excessively large or small valve guide clearance can also have fatal consequences
  • Effects of excessive or insufficient valve clearance and troubleshooting
    Tips for Troubleshooting Valve Problems: Check Valve Clearance: Regularly inspect and adjust the valve clearance according to the manufacturer's specifications to ensure optimal engine performance Listen for Unusual Noise: Pay attention to any unusual engine noise, such as ticking or tapping sounds, which could indicate valve clearance issues
  • What should the valve clearance be? - Carolinas BMW
    Too much or too little valve clearance can result in poor performance or a rough idle because the engine can’t “breathe” normally and operate at peak efficiency Too much clearance means the valves will likely clatter and, over the long term, cause damage to the valves, camshaft lobes or rocker arms Does Valve Clearance get tighter when hot?
  • What Are the Problems Caused by Bad Valve Adjustment?
    If the valve lash is set incorrectly (too little or too much clearance), the engine may respond by rough idling or misfiring Get a certified mechanic to do a clearance adjustment and see if that fixes the issue
  • Valve Failures Explained - Engine Builder Magazine
    Valve-related failures are often due to factors such as detonation, poor quality or defective parts, over-revving the engine, or not setting or maintaining proper valve lash These can contribute to or even cause valve failures, but so can sloppy machining tolerances
  • 3406E pistons hitting valves -it still runs - The Diesel Garage
    In the process, discovered that the intake valves have been just kissing the pistons, and the #6 exhausts have been touching too Because both intake and exhaust have been touching, tells me that the cam timing is correct Question: What could be causing this? Tight valve clearance? Wrong piston crown (2-piece pistons)? Engine overspeed -valve
  • Piston slop how much is to much? Any rebuilders?
    One easy way that I have used to determine if the piston bore has too much clearance is to remove the rings and with a clean piston and clean bore, put the piston upside down and slide it into the cylinder with a long strip of 005 shim stock about 1 2 inch wide
  • DIY - 5S-FE valve stem seal R R valve clearance adjustment
    Toyota wants you to adjust valve clearances about every 100k, but a properly-oiling engine often doesn't need valve clearance adjustment well beyond 200k Fixing the valve stem seal flaw with Viton seals, we solve the biggest problem to proper lubrication, so yeah
  • Valve damage and causes | Motorservice - Rheinmetall
    Possible causes include an incorrectly set valve clearance − or the valve seat insert or valve guide were not remachined centrically An excessively large or small valve guide clearance can also have fatal consequences





中文字典-英文字典  2005-2009