英文字典,中文字典,查询,解释,review.php


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       


安装中文字典英文字典辞典工具!

安装中文字典英文字典辞典工具!










  • What’s a Good Molex Connector Crimp Tool - Pinside. com
    The tools he sells are actually done at Molex spec Molex had a contract with this company to make their crimpers, Molex then changed to a Swiss maker (or another European country can't recall) Nonetheless, the tools he sells, made by Sargent, where specifically made for molex and by molex request
  • Molex vs. TE Connectivity AMP | Tech: Generic | Pinside. com
    Has anyone here had any pro con experiences with using the TE Connectivity AMP brand 100 connectors? Married to TE AMP's version of the Trifercon connector, 86016-3, it should be roughly the same as a Molex KK 100 with a 08-52-0113 Trifercon, right? I ask this because TE still makes 28 position connectors, which are hard to come by
  • . 100 molex connectors where to find? | Tech: Generic - Pinside
    Header lengths -- Molex plugs were intended to work with 0 320" (8 13mm) mating post length IF you are not using a locking header An example of this would be Molex 22-28-4361 There are many pin lengths out there (e g Molex 22-28-4360 with pin length of 0 24") they will work but are a bit too short and the connector doesn't fit real solid
  • Replace general illumination System 7 two pin connector
    A) Replace both the Molex connector on the board and the Molex connector on the wire from the playfield -- great, but I can't find part numbers anywhere, and if I go that route, would like to keep the connection standard i e would like to have the correct Molex on the board, and corresponding Molex for the playfield harness
  • How do I remove Molex female connector? - Pinside. com
    You're basically just needing to push in the "wings" that grab onto the edges of the connector to hold the pins in place A molex removal tool is the best choice, but a paperclip will work, too It just takes longer to get it out that way This guy does it with staples:
  • DIY molex pin remover? | Tools Supplies | Pinside. com
    It sounds crazy, but this specific safety pin works wonders (for 100 and 156 pins) I sell them in 1, 2, or 3 packs (starting at $2 99, free shipping) Great tool to have around for when the $25 molex pin remover breaks And no, they aren't just regular safety pins These ones are heavy duty, thicker and stronger Regular safety pins do not work
  • Molex connector type source recommendations? - Pinside
    So, there are clearly a LOT of different kinds of molex connectors, and I definitely like some better than others I picked up a big kit of various sizes off amazone recently at a reasonable price, but they're all these aggravating leaf-style male connectors rather than substantial pins for example
  • How to disconnect molex connectors which are stuck? - Pinside
    In that case, you might need to use some tools to pry them apart Double check to make sure you can still get those particular molex housings in case you end up wrecking them [edit]: Huh, I'll have to remember to try the hair drier trick the next time I encounter stuck connectors I'd be interested to see how effective it is


















中文字典-英文字典  2005-2009