英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字,中文词皆可:


请选择你想看的字典辞典:
单词字典翻译
swealwe查看 swealwe 在百度字典中的解释百度英翻中〔查看〕
swealwe查看 swealwe 在Google字典中的解释Google英翻中〔查看〕
swealwe查看 swealwe 在Yahoo字典中的解释Yahoo英翻中〔查看〕





安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Putting a network interface up down from command line
    In Xubuntu 14 04, I tried to use both ip and ifconfig to handle a network interface, but they gave the same result $ sudo ifconfig wlan0 down $ sudo ip link set wlan0 down both correcly put down the interface and the connectivity does not work; but then $ sudo ifconfig wlan0 up $ sudo ip link set wlan up did not restore the connectivity!
  • How to bring up a wi-fi interface from a command line?
    As of Ubuntu 18 04 (and corresponding Debian versions) ifconfig and ifup ifdown are deprecated, and the recommended way to bring up the interface is with the ip command: ip link set dev <interface> up ip link set dev <interface> down
  • ifconfig eth0 up 出问题!!!!急急急急急。。。。 - CSDN社区
    一般说来,MAC就是网络控制器,如果该驱动OK,就能看到ifconfig信息; PHY是物理层,负责发送和传输的底层,如果PHY发生问题,ifconfig同样有信息,只有up时才会连接PHY。 MAC和PHY通过MII接口传输以太网数据,通过MDIO接口访问PHY的配置寄存
  • wifi网卡驱动在开发板上 ifconfig ra0 up 异常 - CSDN社区
    secureCRT上面跑arm9的板子,在secureCRT上敲 ifconfig ra0 up 命令(开启网卡),然后就报下面错误 SIOCSIFFLAGS: Operation not permitted 然后我再敲 dmesg 显示开机信息,接下来是我找到具体错误的信息 <-- RTMPAllocAdapterBlock, Status=0
  • 为什么ifconfig eth1 up 后,重启系统eth1网卡又没有启动了 . . .
    以下内容是CSDN社区关于为什么ifconfig eth1 up 后,重启系统eth1网卡又没有启动了?相关内容,如果想了解更多关于系统维护与使用区社区其他内容,请访问CSDN社区。
  • wlan0 down and ip link set wlan0 up doesnt work
    It may have to do with the way Kali connects ip and ifconfig - they have been linked in recent versions Previously and usually (if network-utilities are installed on debian 10, then ifconfig and ip conflict, then forcing one to be disabled)
  • In CentOs 6. 6 how do I get an interface up?
    the interface is up However it is strange that you do not see the IP address on interface eth0 when you run ip a You should see a line like: inet xxx xxx xxx xxx xx brd xxx xxx xxx xxx scope global eth0:1 under the eth0 section The following two methods should work to have the logical interface running: ifconfig eth0:1 10 1 1 1 24 up Or
  • ip link set lt;interface gt; up down: how are scripts called?
    Here it would be RTM_NEWLINK) to bring the interface administratively up Older ifconfig tool asks the same to the kernel using the deprecated (for network) ioctl API (here that would be SIOCGIFFLAGS) These commands are low level commands that do only what was asked and nothing more
  • Interface doesnt go up with ip link set interface up
    The interface was successfully disabled as expected Unfortunately, it hasn't gone back to a UP state since What I tried and other info: 1) The first thing I did was of course issue the command # ip link set wlp6s0 up to bring the interface up Doing this, no errors are given, but the interface remains DOWN, as shown by the output of # ip link
  • 网卡静态IP,ifconfig ethx down;ifconfig ethx up后ping不通 . . .
    以下内容是CSDN社区关于网卡静态IP,ifconfig ethx down;ifconfig ethx up后ping不通相关内容,如果想了解更多关于系统维护与使用区社区其他内容,请访问CSDN社区。 两服务器直连,两网设置静态IP,在一端执行ifconfig ethx down;ifconfig ethx up后ping不通,down之后等待3s再up可通。





中文字典-英文字典  2005-2009